IR + BLE · Available
RF41A
RF remote with voice · Smart TV / OTT
RF, IR, BLE and voice in one 150 mm handset.
What this platform is for
RF41A carries three radios in one handset — RF, IR and BLE — plus a microphone for voice search. RF reaches the set-top box, IR reaches the TV, and BLE carries voice and pairing.
It sits on a BLE 5.2 SoC in a 150 mm body. For a market that still needs IR for the TV and RF for the box, this is the smallest way to cover both with one remote.
Radio and interaction
- Three radios: RF, IR and BLE, with voice input on top.
- BLE 5.2 SoC as the platform.
- Ranges: RF ≥15 m, IR ≥8 m, voice ≥10 m.
What can change per program
- Radio mix — RF, IR and BLE can be enabled or limited per market and per set-top box.
- Key map — key count, legend, and the functions behind each key are defined per program.
- Firmware — a configured build for your platform, or a BSP and driver layer for your own application team.
- Appearance — logo, silkscreen, paint, plating or texture, and the retail packaging.
- Certification — CE, FCC, UKCA, KCC or TELEC are scoped to the final configuration and market.
Ranges are platform values for the reference build. The figure that applies to your product is confirmed on the test line and written into the datasheet.
Specifications
Platform specification.
Values for the reference build. Your configuration is specified in the datasheet issued with the quote.
- Model
- RF41A
- Family
- IR + BLE voice
- Status
- Available
- Radio
- RF + IR + BLE
- Range (m)
- RF ≥15 · IR ≥8 · voice ≥10 m
- Chip platform
- BLE 5.2 SoC
- Voice
- Yes
- Air mouse
- —
- Battery
- 2× AAA
- Size (mm)
- 150 × 40 × 17
- Application
- Smart TV · OTT
Program
From this platform to your product.
Four steps, the same for every model. Durations depend on how far the key map and housing move from the baseline.
Scope
Key map, radio set, market and certification. This is where a datasheet gets specific.
Sample
A unit built to the agreed configuration, so the hand feel and the key layout can be judged on a desk.
Validation
Range, key life, drop and cleaning checks, plus an EMC pre-scan before the certification lab.
Production
Test specification, fixtures and packaging, released with the approved specification.
The stage-by-stage sequence is set out in Prototype to Production.
Related
Close to this one.
Same family or a nearby trade-off. The full line, with the comparison table, is on the products page.
Start a project
Start from RF41A.
Tell us the key map, the radio and the market. We will tell you what changes and what stays.